A proposito di suitsaw1

Descrizione:

10 Myths Your Boss Is Spreading About Stove Wood Burning Stove Wood Burning
How to Properly Start a Wood Burning Stove

Wood stoves can be a great method to reduce energy consumption and warm rooms. However, they need a certain amount of maintenance.

A majority of modern wood stoves comply with EPA emission guidelines. Look for an EPA sticker under or beside the grate, to ensure that your stove won't produce a lot of harmful pollutants.

How to start a Wood Fire

The smell and the sound of a woodfire can be an enjoyable addition to any house. It is essential to know how to build a fire in your stove. Incorrect techniques can lead to the fire not burning effectively and can cause smoke or creosote. The tips below will aid you in starting a fire that will heat your home with minimum effort and ensure your security.

Before you begin a fire, you should check the condition of your coals and logs. If they're damp it will dampen your fire and hinder proper burning. It is possible to open the chimney to eliminate any ash that has fallen into the stove.

Begin by putting a few small, dry pieces of newspaper in your stove. This will help to ignite the tinder and ignite the kindling. When the tinder and the kindling have started to burn, you can add the larger kindling pieces on top. This should be done in a crosshatch fashion so that there will be air between each piece of wood.

If your wood stove comes with an automatic combustion control it will automatically pump air into the fire as it expands. This will help the fire to burn at a consistent pace without the need to open the stove door to keep it in check.

Do not use too much tinder as it will cause the fire to burn at a rapid rate and not use the fuel effectively. Once you've got a good base in your stove with tinder, kindling and embers to start the main flame, you can do this by laying two large logs of the base on the grill. On the top of these base logs lay a layer parallel to them. This method of creating a fire known as a "top-down" fire can result in a successful and long-lasting fire that doesn't completely consume the larger base logs.

Once your fire is well established, close the damper and ensure it stays closed. If you open the damper too early, it can cause the fire to smother and will not allow for the proper air flow, which can lower the effectiveness of the fire.

Adding Wood

Stoves can be used to heat your home efficiently and also save you money. They can be used by themselves or together with central heating or a furnace system to provide the supplemental heating required in large homes or homes with many rooms. Many of the new clean burning stoves that are available use advanced combustion principles that is able to separate the burning volatile compounds from combustible gases and tar. This is achieved by supplying air in two different stages. The first stage allows for the burning of volatile compounds and the second provides fresh air that is pre-heated. This enhances the combustion process and helps reduce the smell.

The amount of heat you can get from your stove is contingent on the kind of wood used and the amount of moisture, as well as the size of the logs. The logs must be stored in a ventilated area for several months prior to when you attempt to burn them, to give the wood a chance to dry. If the logs are soaked with too much moisture, they will produce steam that is in essence wasted energy.

While you're burning the fire, it is recommended to add more wood to the stack in intervals, not all at all at. Too much wood added at one time can cause the temperature of the firebox to increase and creates a vortex that draws smoke and unburnt volatile compounds back into the flame which can decrease your stove's efficiency.

Avoid the use of any other combustibles, such as paper or cardboard in your stove, since they are not wood and have very different physical properties that cannot be burned safely without creating dangerously high temperatures and a lot of emissions. Also, you should not use compressed combustibles such as wood briquettes because they have a completely different physical and chemical composition from actual firewood and are not type-approved for burning in wood-burning stoves.

It is essential to have a professional install and test your wood burning stove. A certified WETT technician can examine your stove to make sure it is safe and reliable. They can also make sure that your chimney works correctly. They also provide maintenance services to keep your stove and chimney in tip-top shape. They can check for leaks in the areas connected to your chimney and fix any issues they discover. They will also ensure that the residents of the house know and follow the evacuation procedures for fire in the event of an emergency.

Adjusting the Damper

When you're not making use of your stove, a damper can control how much heat is lost through the chimney. It can also be used to manage the flame. If the flue opens, but the damper is too closed the fire will not be able to burn as it should and smoke will pour into your home. To ensure you have the best fire with your damper adjusted properly you have to experiment with different locations and observe how each one affects the flames.

Typically, you'll want to keep the damper open enough to let air enter and out of the flue while a fire is burning. This allows the fire to get going and also helps keep it lit so you can enjoy it for hours. A proper opening will prevent the fire from starving of air, and also prevent it from blowing out smoke.

To properly adjust your damper it is important to first make sure that the fireplace has been preheated and the wood stove is hot. This will ensure that the chimney is warm and has an adequate draft. Once this is done the damper on the wood stove can be adjusted.

After the fire has been burning for some time, you need to shut the damper around three quarters of the way. fireplaces wood burning stoves will prevent the warm air from the room from going through the chimney, while allowing the smoke to escape out of the wood stove.

This is the best method to prevent the fire from becoming too hot while still keeping it lit. If you close the damper too far it could block the draft from working, however when it's too wide, a cold breeze could blow into your home.

You can test how much the damper is open by holding your hand near the top of the inside of the flue pipe. If you feel a slight breeze pushing against your hand The damper is most likely in an open position.

The damper settings can differ a little from one stove to the next and even between different kinds of wood. The process of experimenting with the various settings will give you an idea of what to look for, but you will need to tweak until you get the ideal setting for your stove.

Clean up

After the fire, it's crucial to clean the stove and flue. This will reduce the risk of an explosion in the chimney which is the most common cause of fires caused by wood stoves. Creosote is a sticky material that builds up on the inside of the stovepipe and is extremely dangerous. It is caused by moisture and unburned wood particles that are unable to escape the fire. This can also be caused when fires aren't lit properly.

A regular cleaning routine can help keep the buildup of creosote at bay. This can be accomplished by sweeping your chimney once every year. It is recommended to have your stove and fireplace professionally inspected and cleaned at least once a year, too.


It is also a good idea to clean out the ash tray and grate regularly. It is best to burn only wood that is well-seasoned since it will create less creosote. Avoid burning paper, cardboard and plastic. These can release chemicals that can be dangerous for respiratory illnesses and the air, which could be released into your home.

It is also essential to clean the glass of the wood-burning stove regularly. Many modern wood stoves come with self-cleaning windows, which means they don't require as much cleaning. You can make use of stove glass cleaners on the window if you're able get the glass as clean as you'd like on your wood stove.

Some other helpful suggestions for maintaining your wood stove are to turn the vent off when you are not using it, and opening a window or door to increase the flow of air. This will help keep the fire burning hotter and more efficiently, as it won't need to be as active to circulate air. It is recommended not to stack logs, or place them on the fire for a long duration. This can lead to splits and warping. Finally, it is a good idea to avoid using compressed combustible logs in your wood stove, because the paraffin they contain could melt and spill down into the flue, which could cause damage to the stove.