A proposito di potatobudget04

Descrizione:

Three Common Reasons Your Patio Door Lock Repair Isn't Working (And How To Fix It)
Patio Door Lock Repairs

Over time, patio doors experience wear and tear that could cause locks that fail. There are a few basic steps you can take to restore the security of your uPVC door.

Whether it's realigning the lock or cleaning the mechanism that locks these simple fixes will make your home more secure.

Clean the Lock

Patio doors are fantastic for bringing the outdoors inside and keeping out the elements. However they could pose a security threat in the event that the lock isn't working correctly. As time passes, wear and tear, extreme cold and hot weather dirt and debris can cause damage to your patio door's lock and cause it to become difficult to open. With a little care you can ensure that the lock on your patio door always works in a proper manner.

It's important to first clean the patio door lock and all moving parts. This will help remove any dirt or coatings that could be preventing your lock from working effectively. Start by wiping down the moving parts of the lock for your patio door with a damp, clean cloth. then make use of a scouring pad, or a rough damp cloth to scrub any difficult-to-access areas of the door and frame that are coated with dirt. It is recommended to wipe the entire lock with a dry cloth to remove any remaining dampness and let it to dry completely before using it again.

If you have a patio door that uses a pin tumbler latch mechanism, you can grease the lock by applying powdered graphite to the key or applying a Teflon-based lubricant such as WD-40 Multi-Use Product. This type of lubricant can be applied with ease and will not disintegrate over time. If you're unable to find the right lubricant for your lock, apply a pencil that has a thicker tip. Put the pencil into the lock and move it around a bit to distribute the graphite.

Regular maintenance is also essential to keep the tracks of sliding patio doors free of dust, dirt and debris. These tracks can be especially susceptible to ice and snow, which can cause them be stuck or jammed which makes it difficult for your patio doors to open and close.

Tracks for sliding patio doors and rollers can be cleaned by removing any weather stripping that is damaged or dirty and cleaning them before installing it. Patio door rollers can also be cleaned and sprayed down with an oil that is non-stick.

Lubricate the Moving Parts

uPVC french doors, similar to sliding patio doors, operate with 3-4 or sometimes 5-point locking mechanisms which include the handle and lock cylinder operated by the key. These doors also require maintenance, specifically lubrication on the moving parts. This can be done using a thin oil however, never WD40. It should be done at least once a year.

If sagging hinges don't cause the issue, it could be that the door is not aligned. It could be rubbing or catching the hole of the strike plate in the frame. Remove the strike plate and employ a sharp tool expand its mortise. This lets the latch sit perfectly in the hole, and also prevents getting caught or rubbing against the frame.

Measure the length of the cylinder using the help of a piece of wood or a book that fits into the gap above the adjustment screw. The outer dimension is measured from the outside of the door to the center of cylinder. The inner dimension is measured from the center adjustment screw to the end of the of the cylinder.

Check the lock's length

If your patio door latch is difficult to turn, even after cleaning and lubricating, there's a possibility that it's not in alignment with the strike plate hole. Check if your door is balanced, and if the hinge screws are secure. In most instances, moving the strike plate downwards or upwards could fix the problem.

Oftentimes, the problem occurs when the lock's strike is too small for the latch to engage. In this instance, you'll need to enlarge the hole using a chisel or hammer and then test the latch to make sure that it is able to engage the strike plate in a smooth manner without rubbing against or catching on the frame of the door jamb.

You should identify the type mortise lock you currently are using before you purchase the replacement. This can be done by looking at the faceplate and determining if it is round or square. Then, take a look at the screw holes on the existing lock and note the size of each. This will aid you in finding an alternative lock that is of the same size and fits perfectly into the hole that you already have.


You'll need to locate the mortise lock and inspect it for any bends, scratches or other damage that requires to be fixed. A damaged or bent latch is more likely to break than one that's not used much, so be sure to replace the lock with a brand new one that is secure in the event you notice any signs of wear or damage.

Once you've decided on the kind of lock replacement you need, it's now time to begin the actual repair. The old handle and spindle should be removed from the doorway to the patio. Insert the new handle. Begin by installing the interior handle. Align it with the spindle, and then secure it in position using two screws or bolts. Install the exterior handle following the interior handle. After you've completed these steps you can test the new handles to ensure they are able to open and close with ease and that the latch catches correctly when you strike the plate.

Check the Strike of the Door.

The door latch and strike plate are two parts of the lock that work to ensure the latch secures the door. If they are not aligned properly and the latch doesn't latch the door shut properly. This issue is usually easy to repair.

Check the receiving holes of the strike plate to ensure they are free of obstructions like dirt or plastic plugs. Remove the screws that hold the strike plate. This will allow it to move vertically, but it will not be able to separate from the frame. Then, you can adjust the strike plate to ensure that its holes for receiving are aligned with the latch hooks on the door latch. Once the strike plate is adjusted tighten the screws, and test the door to see whether it locks smoothly after the new adjustment.

Door strike plates can be difficult to access for homeowners with sliding patio doors, however they're essential for locking and unlocking your door. These plates are usually placed on the top and bottom of the door jamb where they support the door's latch. The door latch is placed on the strike plate to create the seal when it is closed. If the strike plate has been damaged or rusted or not installed correctly, the latch may not be able to lock the door properly.

One of the most common reasons for an outdoor door lock to stick or not close is a misalignment of the latch and the strike plate. The easiest method to check for this is by performing the "lipstick test." Rub some lipstick on the outside of the deadbolt, and then attach masking tape over it. When you close the door the lipstick will leave an impression on the tape that will show you exactly where the latch meets the strike plate. If RepairMyWindowsAndDoors is too low or high you can easily alter the strike plate.

If your patio door locks for sliding aren't working correctly they could be a problem in keeping your home secure from intruders. You must resolve this issue as quickly as possible. Follow these simple steps to repair your patio door lock and restore it's functionality.