A proposito di domainrat72

Descrizione:

The Most Pervasive Problems In Peugeot 308 Key Fob
Peugeot 308 Key Fob Replacement

Peugeot's 308 may be a little old however it's still eye-catching. It's not the most luxurious car in its class, but it's a relaxing and civilised drive.

Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. The following tips will help whether the problem is intermittent, or constant.

Water Damage

If you accidentally drop your key fob in a puddle or it gets wet while kayaking, canoeing or rafting or canyoning the fob is most likely to be damaged by water. Keep your key fob in a dry bag whenever you go outdoors or do activities that expose it to excessive amounts water.


You should also ensure that the fob is dry before opening it up and using it again. If you notice any odors coming from the fob, like an industrial liquid smell or windshield washer fluid, it's another sign that it's been submerged in water.

A circuit board that's damp can cause the battery's charge to drop its charge, or even explode. If you're able to pull your key fob 308 out of the water in which it was stuck in it, flip the button side down and shake out as much water as you can before opening the case. Remove the battery, then wipe the circuit board clean with a cotton swab, which has been dipped into 90-percent alcohol.

Other reasons your Peugeot 308 remote keyless entry system may fail to function include a dead coin battery or receiver module issue, signal interference, or an electronic chip malfunctioning. If none of these are the cause, you can try resetting the system by removing the battery with 12 volts for around 15 minutes.

Dead Coin Battery

Peugeot cars come with remote start which allows drivers to start their car from an extended distance, which allows them to warm up or cool down the car before entering. This feature is extremely helpful particularly during the cold winter months. However, there are times when the remote start system stops working due to a variety of reasons, including an unresponsive coin battery.

The coin-shaped battery that is inside the key fob can last between two and four years based on how often it's used, where it was purchased and how it is used. The date for use-by will be written on the packaging or marked in the user manual.

If the key fob has stopped functioning after being exposed to clean tapwater, remove the battery and clean the electronic chip with an absorbent paper towel that has been soaked in isopropyl ethanol. Then dry the chip completely before replacing it. If you expose it to soapy or salty water, the chip may be fried and you will need to replace the key fob completely.

If you're not sure the battery is defective you can check its voltage with a multimeter set to your car's voltage range. Connect it to the minus and plus terminals. The KeyLab should be between 12 to 13 volts, however, if it reads lower, the battery needs to be replaced. You can also attempt to reset the onboard computer by disconnecting the battery with 12 volts for a couple of minutes, and reconnecting it in reverse order (positive cable first followed by negative). The engine should then start after this.

Faulty Receiver Module

If you're unable to see the "Key Detected" message on your dashboard, then it's possible that the receiver module has discovered a problem. It's that part that sends a signal to the car when the key fob is activated which acts as an immobiliser. It stops it from starting unless the correct key is present.

This could be due to a variety of causes, such as water damage or simply the aging process. If the chip inside your Peugeot 308 keyfob has been damaged due to dirty tap water it could be due to the fact that the keyfob was exposed it. In this instance you'll need to remove the unit apart and clean it thoroughly with isopropyl alcohol or an electronic cleaner. Once it's dry, you can put the battery back in and try again.

If the issue persists you're probably in need of a idea to visit an area Peugeot specialist or locksmith. They can employ an instrument for diagnosing to pinpoint the problem and then fix it.

The loss of your Peugeot car keys can be an extremely stressful experience. A qualified auto locksmith will be able to solve the issue in a matter of minutes. They can program your vehicle and cut a new working key for you. Click here to find locksmiths near you.

Faulty Electronic Chip

The electronic chip that is in the Peugeot 308 key fob is a very vital component of the remote control system. If it gets damaged, your car might not start or you may get a message saying "anti-theft active". In this scenario, the only solution is to replace the key. Auto locksmiths who are professionals are able to offer the service in the shortest time.

The chip in the key fob of your Peugeot 308 may become faulty for different reasons, such as water damage, sweat or dirt. If your Peugeot key fob has been exposed to dirty or soapy water, it should be cleaned right away. You can clean the electronic component with an absorbent paper towel that has been soaked in isopropyl Alcohol. After that, you should let the battery completely dry.

Radio interference can cause a key fob's functionality to cease. This can be caused by other devices operating at the same frequency as your Peugeot key fob. This can be caused by unsafe conditions or objects that are within the vicinity of the vehicle. It is recommended to see a Peugeot dealer if you experience this issue.

The Peugeot Key Fob 207/308 is very delicate and requires special attention. You should not drop it or throw it around. If you lose it, try to find it as quickly as possible. You can reset all on-board computers by disconnecting the battery that is 12 volts for a short period of time. Disconnect the negative cable before the positive.